How to run a stocktake without stopping sales

Closing a warehouse for a weekend to count everything is the traditional answer, and for many businesses it is no longer acceptable: orders keep coming, stores keep selling. The good news is that an accurate count does not require a full stop. It requires a clear rule about which stock is being counted, and when.

Why a moving warehouse makes counting hard

A stocktake compares what is on the shelf with what the system says should be there. The difficulty is not the counting itself but the timing. If a picker takes three units from a bin after it was counted but before the count is posted, the system will see a shortage that does not exist, or hide one that does. Every method for counting without stopping solves the same problem: making sure the counted quantity and the system quantity refer to the same moment.

Three ways to count while you keep selling

  • Cycle counting: count a small part of the range every day or week, so that every item is counted several times a year. Valuable or fast-moving items are counted more often, for example using an ABC classification. There is never a big count day.
  • Zone-by-zone count: split the warehouse into zones, aisles or bin ranges and count one at a time. Only the zone being counted is frozen for picking, usually for an hour or two; the rest of the warehouse works as usual.
  • Warehouse-by-warehouse count: if you have several warehouses or stores, count one location while the others keep shipping and selling. Orders can be served from another location or held briefly.

Most businesses combine them: cycle counts for day-to-day accuracy and a zone-by-zone or location-by-location full count once a year, where required for year-end accounts. Whether a rolling count can replace a full annual stocktake for statutory purposes depends on your country's accounting rules, so check with your accountant.

How to do it step by step

  1. Choose the scope: which warehouse, zone or bin range you count today, and in which order the rest will follow.
  2. Pick a quiet time window for each zone, such as early morning or the hours with the fewest orders.
  3. Before the window, finish receiving that is already in progress for the zone and move put-away goods to their bins, so nothing is left on the floor.
  4. At the start of the window, record the cut-off time and freeze picking and put-away in the zone. Orders that need stock from it wait or are served from another location.
  5. Count blind: counters record what they see without seeing the system quantity, so they are not tempted to confirm the expected number.
  6. Compare counts with the system at the cut-off time and recount every line whose variance is above your tolerance, with a second person if possible.
  7. Check open documents around the cut-off: receipts not yet posted, picks already taken but not shipped, transfers in transit.
  8. Post the result as a correction by the difference for the counted scope, then release the zone.
  9. Analyse the variances that remain: wrong bin, unrecorded damage, receiving errors or theft each need a different fix.

Worked example (illustrative numbers)

A distributor counts aisle C on Tuesday between 7:00 and 8:30 while the other aisles keep picking. The cut-off is 7:00. For one item the system shows 240 units at 7:00. The counters find 228.

  • Raw variance: 228 − 240 = −12 units.
  • Open documents: a goods receipt of 10 units was physically put away in aisle C at 6:40, but will be posted in the system only at 9:00. Those 10 units are on the shelf but not yet in the system figure.
  • Adjusted system quantity at cut-off: 240 + 10 = 250 units.
  • True variance: 228 − 250 = −22 units, not −12.
  • Recount: a second person counts again and finds 6 units in the neighbouring bin C-14 instead of C-12. They were placed wrongly, not lost.
  • Final variance: 228 + 6 − 250 = −16 units. At a unit cost of 15 EUR this is 240 EUR to explain.

Without the check on open documents the team would have posted −12 and hidden ten missing units. Without the recount it would have written off six units that were simply in the wrong place. The example shows why the cut-off and the open documents matter more than counting speed.

How it works in OrgLines

In OrgLines stock is built from documents: receipts, transfers, shipments and stocktakes. That is what makes it possible to count while the rest of the business keeps moving. A stocktake can cover one warehouse or all of them. A recount of one warehouse corrects stock by the difference found, while a full stocktake sets quantities absolutely, and the result shows how many items were adjusted. Adjusting stock requires a permission, so only the accounts you choose can post corrections.

Warehouses are organised as a tree of zones, aisles, shelves and bins, so a zone-by-zone count has a real address for every line. Stock, movements and transfers are visible per warehouse, and a transfer can move in two steps with goods in transit, which is exactly the kind of open document to check at the cut-off. Sales orders reserve stock in the warehouse it will leave from, and a transfer cannot exceed the available stock in the source warehouse. Storekeepers can receive their counting tasks, change statuses and send photos from the work bot in a messenger.

Common mistakes

  • Counting without a recorded cut-off time, so no one can say which movements belong before and after the count.
  • Freezing the whole warehouse when only one zone is being counted.
  • Letting counters see the expected quantity, which turns counting into confirming.
  • Ignoring goods received but not yet posted, or picked but not yet shipped.
  • Posting the first count without recounting large variances.
  • Overwriting total stock with the count of one zone instead of correcting by the difference.
  • Correcting numbers without looking for the cause, so the same variance appears at the next count.

Checklist

  • The scope and order of zones or warehouses are planned.
  • Each zone has a quiet time window and a named responsible person.
  • Receiving and put-away for the zone are finished before the window.
  • The cut-off time is recorded and picking in the zone is frozen.
  • Counts are blind and variances above tolerance are recounted.
  • Open receipts, picks and transfers around the cut-off are checked.
  • Corrections are posted by the difference by an authorised person.
  • Remaining variances have an explanation and a follow-up.

Try it free in OrgLines

FAQ

Frequently asked questions

Can I really count stock without closing the warehouse?

Yes, as long as the part being counted does not move during the count. Freeze one zone or one warehouse at a time, record the cut-off, and let the rest keep working.

What is the difference between a cycle count and a full stocktake?

A cycle count checks a small part of the range on a regular schedule. A full stocktake counts everything within a set period. Many companies use cycle counts all year and a full count once a year where the accounts require it.

How long should a zone be frozen?

Only as long as the count and the recount take, often an hour or two. Plan the zone size so that it fits into your quietest time window.

What tolerance should I use for recounts?

Set it by value and item: for expensive items recount any variance, for cheap bulk items allow a small percentage. Write the rule down so every count follows it.

Who should be allowed to post stock corrections?

Only a small group with the authority to approve a write-off, not every counter. Separating counting and posting also makes errors and misuse easier to spot.

More on Warehouses & distribution

All guides on this topic